Food Establishment Inspection Report |
||||||||||||||||||||||||||||
Page 1 of ????????? | ||||||||||||||||||||||||||||
|
|
FOODBORNE ILLNESS RISK FACTORS AND PUBLIC HEALTH INTERVENTIONS |
Circle designated compliance status (IN, OUT, N/O, N/A) for each numbered item IN=in compliance OUT=not in compliance N/O=not observed N/A=not applicable Mark "X" in appropriate box for COS and/or R COS=corrected on-site during inspection R=repeat violation |
Risk factors are important practices or procedures identified as the most prevalent contributing factors of foodborne illness or injury. Public health interventions are control measures to prevent foodborne illness or injury. |
|
|
GOOD RETAIL PRACTICES |
Good Retail Practices are preventative measures to control the addition of pathogens, chemicals, and physical objects into foods. Mark "X" in appropriate box for COS and/or R COS=corrected on site during inspectionR=repeat violation |
|
|
IOCI 17-356
![]() |
Food Establishment Inspection Report |
||
Page 2 of ?????? | ||
Establishment: NEW CHINA CITY | License/Permit #: 009219 | Date: 08/28/2023 |
Water Supply: Community Non-Community Licensed Non-Community Waste Water System: Community On-Site IEPA System |
Sanitizer: | Temperature Logs in Use: |
Location | Method | Sanitizer Type | Concentration (PPM) | Heat(F) |
3-Compartment Sink | Chemical Sanitizer | Not Setup | 0 | 0.00 |
CFPM Verification (name, expiration date, ID#): | |||
XIU QIN ZHENG 10/28/2024 18551269 |
|||
Presentation Type: | VISUAL | Number Attended: | 1 |
HACCP Discussed | HACCP Principle | Plan Onsite |
4. Establish a Monitoring System | Discussed the HACCP principle of identifying critical control points such as hot holding at 135 degrees F or above and cold holding at 41 degrees F or below. | Not Applicable |
TEMPERATURE OBSERVATIONS |
Item/Location |
Temp |
Item/Location |
Temp |
Item/Location |
Temp |
PORK/COOK'S LINE COOLER | 40.00°F | SHRIMP/COOK'S LINE COOLER | 36.00°F | BEEF/COOK'S LINE COOLER | 39.00°F |
CHICKEN/WALK-IN COOLER | 37.00°F | RICE/STEAMER | 179.00°F | BEEF/COOKING | 201.00°F |
BREADED CHICKEN/COOLING | 80.00°F | SOUP/REHEATING | 199.00°F |
OBSERVATIONS AND CORRECTIVE ACTIONS |
P=Priority PF=Priority Foundation C=Core R=Repeat |
Item Number |
P/PF/C/R | Code Reference | Violations cited in this report must be corrected within the time frames below. |
10 | PF | 5-205.11 (A) |
(A) A HANDWASHING SINK shall be maintained so that it is accessible at all times for EMPLOYEE use. The handwashing sink next to the 3-compartment is blocked by equipment in sink and garbage can. The blockage of the handwashing sink has been removed. CORRECTED |
36 | C | 4-204.112 (A) |
(A) In a mechanically refrigerated or hot FOOD storage unit, the sensor of a TEMPERATURE MEASURING DEVICE shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot FOOD storage unit. A thermometer is not provided in the warmest part of the walk-in cooler. Provide a suitable thermometer. CORRECT BY NEXT ROUTINE INSPECTION |
47 | C | 4-101.19 |
Nonfood-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material. Cardboard is being used at the carry-out prep area for storing individual bags for eggrolls and in the reach-in cooler for storing green beans. Discard the cardboard and replace with materials that easily cleanable and non-absorbent. Provide materials that are safe, durable, corrosion-resistant, nonabsorbent and are smooth to allow for easy cleaning. CORRECT BY NEXT ROUTINE INSPECTION |
47 | C | 4-501.11 |
(A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2. (B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications. (C) Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate FOOD when the container is opened. Gaskets on the walk-in cooler door are cracked and torn. Replace the damaged or missing gaskets so the cooler can hold food at the proper temperature. CORRECT BY NEXT ROUTINE INSPECTION |
49 | C | 4-601.11 |
(B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations. The cook's line cooler, the shelving in the walk-in cooler, the reach-in cooler at the carry-out prep area and the bulk food storage area are soiled. CORRECT BY NEXT ROUTINE INSPECTION |
55 | C | 6-501.12 |
(A)PHYSICAL FACILITIES shall be cleaned as often as necessary to keep them clean.(B)Except for cleaning that is necessary due to a spill or other accident, cleaning shall be done during periods when the least amount of FOOD is exposed such as after closing. The accumulated grease on the floor under the cooking equipment, the flour and corn starch by the bulk food area and the front carry-out area (outside the kitchen) are soiled. Routinely clean all floors, mats and duckboard. CORRECT BY NEXT ROUTINE INSPECTION |
55 | C | 6-501.11 |
PHYSICAL FACILITIES shall be maintained in good repair. The hand sink next to the 3-compartment sink is pulling away from the wall. Re-anchor the hand sink to the wall and apply caulking where the sink meets the wall. CORRECT BY NEXT ROUTINE INSPECTION |
XIU QIN ZHENG Person In Charge (Signature) |
Karen Stowe Inspector |
Follow-up: Yes No | Follow-up Date: |